Cart

Your Cart is Empty

Back To Shop

Frost Touch Free Soap Dispenser

Specifications:

UPC Code: 624622714000
Shipping Size: 6″D x 6″W x 12″H
Shipping Weight: 1.75 lbs. (0.8 kg.)

Site Location: Hands free soap/sanitizer dispenser is ideal for high traffic areas and multiple mirror mounting.

Dispensing: Soap is dispensed when hand is placed within 2-1/4″ (6cm) under the unit.  Bulk fill soap viscosity range of: 2,000 – 5,000 cps, (covers most liquid soap/sanitization products).

Materials: Plastic moulded cover. Alcohol/corrosion resistant silicone valve.

Features: Unit is powered by 3 “c” alkaline batteries (not included).  Battery life is 10,000 cycles. or one year. Low battery indicator (flashes red).

Capacity: 950 ml. (32.1 ounces)

Weight: 1.5 lbs. (0.7 kg.)

Dimensions: 4.125″D x 4.375″W x 10.375″H

Installation: For unrestricted access, bottom of unit to floor should not exceed 44″ (111.7). Insure touchless unit is mounted 20 cm above any horizontal surface (30 cm for stainless steel). Prior to mounting using self adhesive: clean glass surface, mark clearly with removable marker or masking tape the exact location and plumb line for unit. The foam tape backing on the dispenser does not allow for re-positioning of unit if it is mounted crooked or askew. Allow tape to set ten hours prior to filling dispenser with soap and loading batteries.

Maintenance: We recommend that units be periodically rinsed out with warm water to prevent soap build up that may hinder the performance of the valve. It is also recommended that users avoid harsh chemical cleaners when cleaning the outside of the unit.  Normal preventative maintenance and cleaning will keep Frost products functioning properly and may extend normal product life. Products should be wiped down with a damp soft cloth periodically. Approved stainless steel cleaner may be used to clean scuffs or fingerprints on stainless surfaces. Do not use harsh detergents or chemical cleaners.

Warranty: Frost Products Ltd warrants that if any Frost product or Frost product part proves to be defective within 12 months from the date of shipment from the factory it will be repaired or replaced without any charge when authorized. Frost warranty does not cover damaged product due to neglect or mishandling. Frost warranty does not cover installation or removal costs.

SKU: 714P Category:

Cart

Your Cart is Empty

Back To Shop